What is wet edge signature matrix?

The Signature Matrix blends a range of pebble sizes that gives this finish a smoother texture than finishes with only one pebble size. This special blend is also very appealing visually, allowing you to really appreciate the color and beauty of each stone as you look down into your pool.

Which is better Pebble Tec vs wet edge?

Unlike Wet Edge, Pebble Tec utilizes superior material that is able to enhance the look and feel of backyards with naturally tumbled stones and the finest pebbles from all across the world.

What is a wet edge pool?

Wet Edge pebble finishes are the best option for your pool if you’re looking for a long-lasting, durable and low-maintenance surface. Naturally tumbled for roundness and smoothness and non-crushed pebbles give a beautifully textured look and feel to your surface WITHOUT the roughness.

What is wet edge pebble?

This innovative product line combines regular and small size pebbles. The two pebble sizes interlock and create a tight compaction that gives the finish an even smoother texture than single-sized pool finishes.

How long does wet edge last?

Wet Edge should yield 2-10 years of use, depending on these factors, with an average useful life of around 5 years.

Is Quartz better than plaster pool?

Quartz surfaces are more durable than plaster and offer some color variety like pebbles. Quartz finishes are perfect for families who want a low maintenance option, but also want their pool to define the backyard.

Is wet edge the same as Pebble Tec?

Wet Edge and PebbleTec are pretty much the same product. Wet Edge was started by people who left PebbleTec. It all comes down to the installer.

How long does it take for Diamond Brite to cure?

Allow BOND-KOTE to cure for at least six (6) hours before plastering. The plaster should be applied to BOND-KOTE within three (3) to five (5) days. If left for a longer period before the finish is applied, ensure Bond Kote is clean and free of dirt, efflorescence, and other contaminants.

Can wet edge be applied in the rain?

Avoid curing Wet Edge in direct sunlight, or when dew, fog, or rain may effect the cure rate. For the best product satisfaction, do not attempt to sand or recoat if the previous coat is not cured sufficiently.

How long does it take for wet edge to dry?

between 8 hours to 16 hours
It can take anywhere between 8 hours to 16 hours before it’s fully cured. Be sure to apply thin coats. Applying Wet Edge too thick may cause problems with drying.