Why did my Insignia soundbar stop working?

If your Insignia Soundbar is not working, check and see if all the cables are properly connected to the ports. If the bluetooth isn’t connecting, bring the soundbar closer to the other device. You might need to do a soft or hard reset. Make sure you have the latest firmware update installed.

How do I get my Insignia soundbar to work?

1. Step 1: Place the soundbar in front of the TV. First, put the soundbar in front of the TV.
2. Step 2: Connect the optical cable to the TV.
3. Step 3: Connect the optical cable to the soundbar.
4. Step 4: Plug in the soundbar.
5. Step 5: Turn down TV speakers.
6. Step 6: Set TV audio output to PCM.
7. Step 7: Using the remote.

Why is my soundbar speaker not working?

Unplug the TV and soundbar for 10 seconds, and then plug them back in. Sometimes, reestablishing the HDMI “handshake” between the TV and the soundbar can fix minor malfunctions. 8. Update the firmware in the TV and soundbar, and then cycle the power.

How do I pair my NS SB314?

information. 3 On your Bluetooth device, select “NS-SB314” from the device list. Repeat step 2 if “NS-SB314” is not displayed. 4 If a PIN code is requested, enter “0000.” 5 When pairing is completed the Bluetooth indicator on the top of your soundbar turns on.

Where is the reset button on my soundbar?

How to reset the Soundbar

1. On the unit, press and hold the + (volume up) button, (power) button, and (input select) button for more than five seconds to reset the system.
2. Unplug the AC power cord.
3. Plug the AC power cord back in again, and press the (power) button to turn on the unit.

How do I get my TV to recognize my sound bar?

To set up HDMI ARC, power on your TV and soundbar.

1. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV.
2. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar.
3. Next, change the source on your soundbar to the D.IN.

How do I reset my sound bar?

How do I sync my soundbar with my TV?

Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV. Connect the other end to the TV OUT (ARC) port on your sound bar. Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

How do I pair my insignia speaker?

Switch on the speaker and press the Bluetooth button for a few seconds. You can switch on Bluetooth on your mobile phone by going to the settings in your phone (both Android and iOS). Select Bluetooth settings. The third step is to wait for the phone to connect.

Why is no sound coming from my Bluetooth speaker?

If you’re getting no sound out of your Bluetooth headphones, make sure that the Media Audio setting is turned on. With your Bluetooth headphones connected, go to Settings, and click Bluetooth. Select your Bluetooth headphones from the list. On the next screen, make sure that Media Audio is turned ON.

How do I put my Insignia Soundbar in pairing mode?

Pairing your devices (10 m) of your soundbar. Select Bluetooth as the input source by pressing the (source) button on the remote control or the soundbar. The blue Bluetooth indicator on the soundbar blinks slowly. Navigate to your device’s Bluetooth settings, turn on Bluetooth, then search for available devices.