What is Oxpho blue?

With Oxpho-Blue, all you need do in most cases, is dampen a piece of cotton flannel and give the area a good rubbing. The chemical goes through the oil on the gun, removes thin rust and blues the steel underneath. No after-rust.

Which one of the following is a popular cold blue formula?

Fast, Easy, Wipe-On, Wipe-Off Application Original High-Speed Formula Deep Penetrating. 44/40 has long been one of the cold-blue standards in the industry and we here at Brownells are delighted to have purchased the original, high-speed formula and the legendary name and brought it back to its many fans.

What is in cold bluing?

At least one of the cold bluing solutions contains selenium dioxide. These work by depositing a coating of copper selenide on the surface.

What is cold blue made of?

A bluing solution is made of potassium nitrite and sodium hydroxide dissolved into water. The solution is heated to approximately 275 °F (135 °C). You should leave the part immersed for 15-30 minutes. Rinse the piece in cold water.

What is Gun Blue made of?

In colloquial use, thin coatings of black oxide are often termed ‘gun bluing’, while heavier coatings are termed ‘black oxide’. Both refer to the same chemical process for providing true gun bluing.

Is there different colors of gun bluing?

This method must not be used on critically heat-treated parts such as receivers, slides or springs. It is generally employed on smaller parts such as pins, screws, sights, etc. The colours range through straw, gold, brown, purple, blue, teal, then black.

Can you blue galvanized steel?

This is why: I’m bluing some galvanized steel washers to use as accents on a leather coat. I wanted to age the metal and darken it, and bluing is definitely the way to do this. I’ve done a few test pieces, and they’ve turned out wonderfully.

Does bluing prevent rust?

Hot bluing is the current standard in gun bluing, as both it and rust bluing provide the most permanent degree of rust-resistance and cosmetic protection of exposed gun metal.

Is bluing toxic?

Bluing liquid is slightly toxic, but can become more toxic as Prussian blue can emit hydrogen cyanide when exposed to high temperatures, strong UV light or acid.

What is slow rust bluing?

The Theory. Essentially, rust bluing uses an acid solution to rust the steel in a controlled environment. Boiling the rust converts the red oxide to black oxide which constitutes the metal finish. The excess rust is removed and the process is repeated until the desired finish is required.

https://www.youtube.com/watch?v=pPHzdLBb_So