Helpful guidelines

Where do I find the model number on my Bissell carpet cleaner?

Where do I find the model number on my Bissell carpet cleaner?

Where’s my model number? On machines it’s on a white label like this. It’s usually on the lower back or bottom of the machine (for Lift-Off® models, remove the Lift-Off pod to find label) or behind the cleaning tanks.

Why is my Bissell Pro Heat leaking water?

A likely reason why there is water leaking from the tank is that it is not positioned correctly. Unlatch the top tank by lifting up on the tank latch then pulling the tank up and out of the carpet cleaner.

Why is my Bissell ProHeat carpet cleaner not spraying water?

If your machine is still not spraying, check to make sure the clean tank has water and/or the water & formula mixture in the tank. If your tank is empty, this could be the reason your machine is not spraying. You will need to fill your clean tank again. Reset the tank and ensure it sits snug on the machine.

What is the model number for a Bissell ProHeat pet?

ProHeat® Pet Upright Carpet Cleaner 89108 | BISSELL®

How do I contact Bissell customer service?

(800) 237-7691Bissell / Customer service

Why is my Bissell carpet cleaner not dispensing soap?

If you mark that the soap solution is not spraying, turn off your Bissell carpet cleaner as early as possible. Remove the tank and set it aside. If the water tank was installed imperfectly, the soap solution will not spray. Make sure that the water tank is full.

Why is my carpet shampooer not spraying water?

The machine will stop spraying water if the filter becomes clogged, which will prevent the machine from getting damaged because of the clog. Fix this by cleaning the flow indicator filter. To unclog it, unscrew the flow indicator cap on the front right side of the foot of the machine.

What does ProHeat mean Bissell?

BISSELL SpotClean ProHeat uses the power of heated cleaning to permanently remove tough spots and stains when used with BISSELL Spot & Stain and Oxy Boost formula. DeepStain Tool dispenses formula deep into carpets to remove tough, set-in stains.

How to troubleshoot a Bissell ProHeat?

Bissell proheat pet not picking up water. Use the energy of temperature and enjoy a strong clean with the Bissell Proheat. There are a number of ways to troubleshoot vacuum suction trouble to get your machine working properly again. Switch off and unplug it from the wall, before the start of troubleshooting.

Which is the best Bissell carpet cleaner?

Bissell Pet Hair Eraser Upright Bagless Vacuum Cleaner LED-lit crevice tools$$$4.8

  • BISSELL AirRam Cordless Stick Vacuum Cleaner with Lithium Ion battery,1984 22V Lithium Ion battery for 30 minutes$$$4.8
  • Bissell 20431 Powerglide Lift Off Pet Plus Upright Bagless Vacuum On/off brush$$$4.7
  • How to repair a Bissell Pro heat carpet cleaner?

    Make sure there is no pet hair or debris on the red motor duct.

  • Next,make sure the bottom cap is screwed on completely.
  • Lay down the tank on the floor and insert the bottom first.
  • Next lay the top of the tank close to the machine and kick back up to clicks into the right place.
  • How to use the Bissell ProHeat pet?

    – Spray the BISSELL Stain PreTreat formula onto heavy traffic areas, soiled areas, or stains. – Allow penetrating for at least 3 minutes. – Use the ProHeat Pet machine on the high traffic setting.