What is yaskawa A1000?

The A1000 is the premium AC drive from Yaskawa. It provides great operation reliability, environmental benefits, and energy savings as well as many other user-oriented operational features that make it a first-class choice. Encoderless operation of PM motors with full torque at zero speed.

Where are Yaskawa drives made?

Japan
The Yaskawa Electric Corporation (株式会社安川電機, Kabushiki-gaisha Yasukawa Denki) is a Japanese manufacturer of servos, motion controllers, AC motor drives, switches and industrial robots….Yaskawa Electric Corporation.

How do I reset my Yaskawa drive?

To reset the drive and set parameters to their default values, end users need to use the “Initialize” command in the V1000’s A1 Menu. This is done at parameter A1-03. The value should be set to 2220, for factory two-wire control.

What causes DC bus overvoltage?

Possible causes: The Input voltage is too high. Improper floating ground or high input voltage on one of the phases. There are power spikes or surges at the input.

What is base block in VFD?

Baseblock is simply a software parameter configured to perform a similar function, but it does not have a dedicated input to do so.

Is Yaskawa a good brand?

Yaskawa America, Inc. was named one of America’s Safest Companies in 2017 by EHS Today, a magazine for environment, health, and safety leaders.

Does Omron own Yaskawa?

Finally during the fall of August 2004, Yaskawa brought the last branding partner, Omron IDM, into the fold as well. Yaskawa did so by purchasing the rights to Omron IDM Controls’ HVAC and Industrial channels. Since August of 2004, Yaskawa Drive products have been marketed solely under the Yaskawa name in the Americas.

How do I reset my v1000?

Remove the jumper, return it to pins 6 & 8 of the Debug port and cycle power. The controller resets in approximately 60-seconds. Once the reset is complete, the LED returns to green on a VertX EVO. After the 30-second window, the LED returns to normal Red state on a VertX EVO.

How do you fix overvoltage?

POSSIBLE FIXES:

1. Turn the overvoltage controller is on.
2. Check supply voltage for constant or transient high voltage.
3. Check the operation of brake chopper and resistor.
4. Increase deceleration time.
5. Use the “coast to stop” function whenever possible.
6. Fit frequency converter with brake chopper and brake resistor.

What would cause an overvoltage?

Overvoltage can be caused by poor regulation of a power source from a utility company, oversized transformers, uneven or varying circuit loading, wiring errors, and electrical insulation or isolation failures.

What is base block on a Yaskawa drive?

Baseblock. A baseblock indication will prompt “bb” to display on the keypad. The baseblock alarm can be consider more of a warning, rather than a fault condition. This alarm occurs when the drive output is interrupted by an external baseblock signal.

What does base block mean?

[′bās ‚bläk] (building construction) A block of any material, generally with little or no ornament, forming the lowest member of a base, or itself fulfilling the functions of a base, as a member applied to the foot of a door or to window trim.

Is there a technical manual for Yaskawa A1000 High Performance drive?

YASKAWA AC Drive-A1000 High Performance Vector Control Drive Technical Manual for CIMR-AU 200V/400V/600V Drives (Portuguese-Brazil) This manual is applicable to A1000 U-spec. 200 V, 400 V, and 600 V class drives. This manual provides detailed information on parameter settings, drive functions, and MEMOBUS/Modbus specifications.

What is an A1000 drive?

The A1000 is a full featured drive, providing outstanding quality, performance, flexibility, and environmental friendliness through 1000HP. Enjoy network communications, feedback, and expandable I/O to control anything from simple fans and pumps to complex machines.

Do I need A Manual supplement for single-phase applications?

For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing. Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-AU2A081FAA and smaller).