What is renasys go?

The RENASYS GO System provides powerful NPWT to support the management of complex wounds for ambulatory or post-acute patients. In applying controlled levels of sub-atmospheric pressure,2 it works to effectively manage wounds in a variety of ways.

What is renasys touch?

RENASYS◊ TOUCH The RENASYS TOUCH Device is the innovative, simple and effective Negative Pressure Wound Therapy (NPWT) choice. It is designed to provide individualized NPWT for highly complex wounds. This facilitates effective therapy while supporting individualized patient care in acute care institutions.

What is a pico medical device?

The PICO 7 sNPWT is a wound care system, which provides suction known as Negative Pressure Wound Therapy (NPWT). This draws out excess fluid from a wound and provides a compressive force1,2 protecting the injured area from getting dirty3 to ultimately help promote healing.

How do I turn on renasys?

Power ON the RENASYS GO device by pressing and holding the Power button for 2 seconds. Powering ON the device will start therapy. Power OFF the RENASYS GO device by pressing and holding the Power button for 2 seconds. Powering OFF the device will stop therapy.

How do you make vacuum dressing?

Place a foam or gauze dressing (bandage) directly on the wound. Cover this dressing with a clear film that seals to the skin around the wound‌ Insert a tube into a small opening in the clear film and connect the other end to a vacuum pump.

How do you repair a leaking wound vac?

Fixing a leak

1. Gather these supplies on a clean work area.
2. Wash your hands.
3. Put on your gloves.
4. Check the dressing for leaks.
5. Test the leak area by holding the dressing down with the palm of your hand.
6. Trim away any loose pieces of the dressing.
7. Put a new piece of dressing on the area that had the leak.

What is the renasys go used for?

The RENASYS GO is a portable Negative Pressure Wound Therapy (NPWT) device. It is designed to be used with Smith & Nephew power supply (REF 66800161). 200ml 100ml 50ml 300ml 5 EN Canisters • 300ml and 750ml

What is the renasys go suction device?

The RENASYS GO suction device is designed to provide Negative Pressure Wound Therapy to a closed environment over a wound, in order to evacuate exudates from the wound site to a disposable container, which may promote wound healing via removal of fluids, including irrigation and body fluids, wound exudates and infectious materials.

What are the modes of operation for renasys™ go?

Modes of Operation RENASYS™ GO offers both continuous and intermittent modes. Selection of therapy mode setting is a clinical decision based on physician judgment, wound type, exudate level, exudate consistency and patient comfort. In continuous mode, device will maintain selected pressure setting without stopping until switched off.

How should I prepare for placement of renasys go?

Prior to placement of RENASYS GO, the medical professional treating the wound must assess how to best use the system for an individual wound. It is important to carefully assess wound and patient to ensure clinical indications for Negative Pressure Wound Therapy (NPWT) are met.