What is Basalite cement mix?

What is Basalite cement mix?

CONCRETE MIX is a pre-blended mix of fine and coarse aggregate and Type GU Portland cement packaged in 30 kg sacks and in one cubic yard Bulk Bags. It is available in compressive strengths of 25 MPa, 30 MPa, 35 MPa, and 40 MPa.

What is plastic cement used for?

Use plastic cement to fill and seal joints in concrete, wood, metal or masonry building construction or mix it with asphalt to hang roofing tiles. It may also be used to seal parapet walls, flashing, skylights and to repair all types of cracks.

What is Basalite Type II V cement?

This product provides the basic performance characteristics of Type I Portland Cement, as well as the moderate sulfate resistance and lower heat of hydration characteristic of Type II Portland Cement.

What is plastic cement mix?

Plastic Cement is an air entrained Portland Cement with lime. This product is designed to bond with Plaster Sand and stick to wire mesh on vertical applications such as scratch and brown coat stucco.

What is the mix for 30 Mpa concrete?

To make 1 cubic metre of 30 Mpa concrete you will need to mix 10 bags of cement with 0,65 cubic metres of sand and 0,65 cubic metres of stone.

Can I use plastic cement for concrete?

MIT undergraduate students have found that, by exposing plastic flakes to small, harmless doses of gamma radiation, then pulverizing the flakes into a fine powder, they can mix the irradiated plastic with cement paste and fly ash to produce concrete that is up to 15 percent stronger than conventional concrete.

How long does plastic cement take to dry?

Model cement: Usually sold in tubes as “model maker” glues, model cement forms a strong bond on acrylics and polystyrenes and can be used on most plastics, except plastic foam. Clamping is usually required until the cement has set (about 10 minutes); curing time is about 24 hours.

Is plastic cement the same as rubber cement?

Use rubber cement for paper arts, such as scrapbooking, collaging, and card making, as well as with artwork and photo mounting. Some bottles even have a cap with a built-in application brush. Plastic Cements work by dissolving a thin layer of the surface on a plastic to create a deeper and more flexible bond.

What MPa should a slab be?

(a) The 20 MPa and 25 MPa compressive strengths, on the one hand, are usually used for house slabs, driveways, footings and footpaths.