Is the R53 MINI reliable?
Older used Mini Cooper reliability depends on the model year and engine. Regarding used first-gen Mini Coopers, the last two model years are widely considered both the most desirable and reliable, Road & Track reports. That especially holds for the R53 Cooper S, which is the only S model with a supercharged engine.
What BHP is a Mini Cooper S R53?
|Mini Mini R50 Cooper S R53 Engine Technical Data|
|Compression Ratio :||8.3|
|Maximum power – Output – Horsepower :||163 PS or 161 bhp or 120 kW @ 6000 rpm|
|Maximum torque :||210 Nm or 154 lb.ft @ 4000 rpm|
|Drive wheels – Traction – Drivetrain :||FWD|
Will R53 seats fit Mini r56?
You just need to swap the plugs. The bolt/seat pattern is identical as the greater chassis is the same. I got the r56 seats into the r53 no problem.
What year is the R53 Mini Cooper S?
Built from 2001 and available from 2002 in North America, the R53-chassis Cooper S has aged surprisingly well.
Will r53 seats fit Mini r56?
What is the difference between a Mini R50 and R53?
R50 refers to the base model MINIs. These are the Cooper, the MINI One and the diesel-powered MINI One D. R53 refers to the top of the line hatchback model, the MINI Cooper S and Cooper S models with the John Cooper Works package.
How do you remove the rear seats from a Mini Cooper?
Removing the rear seats from a Mini Cooper is a task that is more easily performed by two people, though it is possible for one person to do it. Open the trunk of the Mini Cooper and push either seatback forward. Locate the attachment point that connects the seat to the car. The seat attachment point is located in between the seats (in the center).
How to lose weight on a Mini Cooper?
Need to lose weight? Drop 36 lbs from your Mini Cooper by removing the rear seat components and replacing it with the Performance Rear Seat Delete Kit. thick ABS Plastic with a textured surface and heat-rolled edges, this provides a nice hidden storage compartment for your valuables and increases interior cargo space.
How do I remove the seat from the front?
Each seat is held in place with 4 T45 Torx bolts, one in each corner. Using the ratchet, T30 torx bit Undo the front two bolts. 5. Slide the seat forward then tilt it forward, undo the rear torx bolts. The seat can now be removed but be careful not to snag the wires and keep the seat in the tilted position for ease of removal.
How do I secure the seat delete to the harness?
The seat delete is secured using stock mounting points. On the Schroth Harness, the outer belt needs to be mounted to the floor with the stock seat belt mounting bolt. The harness that plugs into the center buckles can be plugged in and removed with the seat delete in place.