Helpful guidelines

Is AFCI required by NEC?

Is AFCI required by NEC?

Arc Fault Circuit Interrupters (AFCIs) are an important electrical fire prevention and safety requirement of the National Electrical Code (NEC®), which first required them beginning in 1999.

What is a receptacle NEC?

210-21(b) Receptacles A “Receptacle,” as defined in Article 100, is a contact device installed at an outlet for the connection of an attachment plug. The words “receptacle” and “receptacles” appear quite often in the National Electrical Code (NEC). In fact, they appear more than 250 times.

What NEC code is current?

The current California NEC While there is a 2020 edition of the NEC, California — along with 23 other states — is still using the 2017 NEC.

When did NEC require AFCI?

ARC-FAULT CIRCUIT INTERRUPTERS (AFCIs) first made their appearance in the National Electrical Code (NEC) in 1999, with a mandatory effective date of Jan. 1, 2002.

What requires AFCI breaker?

AFCI protection is currently required for all 15 and 20 amp branch circuits providing power to outlets* in residential family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, and similar rooms or areas.

How should receptacles be installed?

The electrical code allows outlets to be installed with the ground plug hole facing up, down or sideways. It’s up to you, there is no standard electric outlet orientation. So that means there really is no such thing as upside down outlets.

What NEC code is Ohio using?

Updated 2020 NEC Code Regulations by State

State Current Adopted Edition of NEC (Effective Date)
North Dakota 2020 (1/1/2021)
Ohio 2017 Commercial (11/1/2017) 2017, with Ohio amendments One-, two-, and three-family dwellings (7/1/2019)
Oklahoma 2014 Commercial (11/1/2017) Residential 2015 IRC Electrical Chapters (11/1/2016)

Can I use AFCI instead of GFCI?

Can a separate AFCI Receptacle and a GFCI Receptacle be used on the same circuit? Yes, they both can be used on the same circuit; however, the Dual Function AFCI/GFCI Receptacle offers the option of providing both AFCI and GFCI protection in a single device.

What does error code P2002 mean?

Error Code P2002 is defined as Diesel Particulate Filter Efficiency below Threshold Bank 1, which refers to an issue in the efficiency of the particulate filter in the exhaust, which is most likely caused by faulty filter or sensor, or exhaust leak.

What does DTC P2002 mean on a diesel engine?

If this occurs, the malfunction indicator lamp (MIL) will be illuminated and a diagnostic trouble code (DTC) will be set in system memory. DTC P2002 is defined as “Diesel Particulate Filter (DPF) Efficiency Below Threshold (Bank 1).”

What does P2002 diesel particulate filter efficiency below threshold mean?

The trouble code “P2002 diesel particulate filter efficiency below threshold” relates to an emissions control device. Installed on 2007 and later diesels, it eliminates the soot emitted from their exhaust.

What are the most common repairs for a P2002 code?

The most common repairs for a P2002 are as follows: Diesel particulate filters were not widely used until the mid-2000s, so if your diesel vehicle is older, it may not encounter a P2002. Need help with a P2002 code?