How do you reset the ink levels on an Epson?

Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled.

How do I reset my ink level warning indicator?

You will need to hold the COLOR button (or black button) AND the STOP button for 5-8 seconds to reset the ink level monitor/counter feature. NOTE 2: Following printer reset the ink low indicator may remain illuminated (steady, but not flashing) and you should still be able to print.

How do I bypass Epson ink levels?

Bypassing ‘no ink’ errors with Epson print drivers

1. Open the lid, hold down the ink button.
2. When the ink holder moves into position, lift up the lid to the cartridge that is ‘out’ of ink, then close it without removing the cartridge.
3. Close the lid, and continue to print.

How do I download Epson Resetter?

You may download the Maintenance Reset Utility when you receive the following message on your PC: A part inside your printer is at the end of its service life. Click the link below for details. Click on the link and complete the required information to download the utility.

How do I reset my Epson ink cartridge without Resetter?

How To Reset Epson Ink Cartridge Chip Without Resetter. Hey, you can reset Epson ink cartridge without resetter! As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

How do I reset my Epson printer?

To Factory Reset an Epson printer:

1. Turn off the printer.
2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
3. Turn on the printer while holding the reset button.
4. Wait until a message prints indicating that the printer is resetting.

Where is reset button on Epson printer?

Locate the control panel of your Epson printer. It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

How do I get my Epson printer to print without color ink?

1. Open the File menu or click and select Print.
2. Make sure the product is selected as the printer.
3. Click Properties or Preferences.
4. Click the Main or Advanced tab.
5. Select Black/Grayscale under Print Options.
6. Click OK.

How do I reset my Epson counter free ink?

First, you will normally need to [Clear counter overflow] under the menu listing of [Protection Counter]. You will then need to use the [Soft reset] utility on the menu under [Extra]. Wait about 5 minutes for the printer to reset. This will reset your printer and stop the lock out.

How do I make a chip resetter?

How to Make Your Own Epson Chip Resetter

1. Grasp one of the ends of a metal paper clip and bend it outward.
2. Remove the ink cartridge from the printer.
3. Insert the end of the paper clip into the hole and press down.
4. Insert the printer cartridge back into the print head and continue printing as normal.