Life

How do I fix the carriage jam on my HP printer?

How do I fix the carriage jam on my HP printer?

Solution

  1. Step one: Turn the All-in-One off and on again.
  2. Step two: Clear any paper jam.
  3. Step three: Make sure that the print carriage can move freely.
  4. Step four: Remove the print cartridges.
  5. Step five: Reinstall the print cartridges.
  6. Step six: Make sure the control-panel faceplate is correctly installed.

How do I reset my HP Officejet Pro 8500a Plus?

Please try:

  1. Turn the printer off with the front panel button.
  2. Disconnect the power cord from the product, and then wait 20 seconds.
  3. Press and hold # and 6 (or 9) while reconnecting the power cord.
  4. Wait 10 seconds, and then release both buttons. The product resets and prints an alignment page.

How do I fix a stuck ink cartridge in my HP printer?

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

How to Fix HP OfficeJet pro 8500A (A910) printer paper jam error?

HP Officejet Pro 8500A (A910) Printers – Paper Jam Error 1 Look for jammed paper. Paper jams can occur in multiple areas of the printer. 2 Check the carriage path and reseat the printheads. Clear the paper jam from the top of the printer. 3 Clean the rollers. 4 Reset the printer. 5 Service the printer.

How do I clear a paper jam error on my printer?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again.

How do I fix the print carriage that won’t move?

With the product turned on, open the print cartridge access door. The print carriage might try to move into the access area. If so, allow it to move to that position. Without turning off the product, unplug the power cord from the back of the product. Unplug the power cord from the power source.

How do I change the print cartridge on my HP printer?

Open the print cartridge access door, and then wait until the print carriage is idle and silent. Press down lightly on the end of each print cartridge to release it. The tri-color print cartridge is on the left. The black or photo print cartridge is on the right.