How much HP can 650cc injectors handle?
Table of Contents
How much HP can 650cc injectors handle?
So 650cc injector= 650hp if injector is running at 100% duty cycle. I would scale it down a bit to around 80-85% duty, so that would put you at around 520-550hp range. A single walbro can flow enough fuel to feed the car about 500-550hp, but I would advise against it.
What size injectors do I need for 500hp?
Flow Rate Definition, Calculating Horsepower Range
| Injector Flow Rate | Naturally Aspirated Engine | Engine w/ Power Adder |
|---|---|---|
| 30 lbs./hr. | 350-450 hp | 300-375 hp |
| 36 lbs./hr. | 425-540 hp | 350-450 hp |
| 42 lbs./hr. | 500-625 hp | 410-525 hp |
| 46 lbs./hr. | 540-690 hp | 450-575 hp |
How much HP can 800cc injectors handle?
Based on ATS’s website (http://www.atsracing.net/ats_racing_fuelmods.htm), it said that the same size 800cc will give approx. 460whp. I can see how roughly 540 flywheel hp converts to roughly 460whp after transfer. For rough figuring on a 4 cylinder engine, HP is about 2/3 of injector cc.
How much HP will 120lb injectors support?
1900 horsepower
Rated injector flow: 120 lb/hr @ 43 PSI. Supports up to 1900 horsepower.
How much HP will 60lb injectors support?
60′ will support 600+ rwhp with pump fuel…not the case with e85 at those levels!
How many pounds are 650cc injectors?
72 lbs/hr
650cc (72 lbs/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS2 engines (High-Z)
How much HP can 1000cc injectors handle?
The 1000cc Injectors can support 650+whp.
How much horsepower can 1300Cc injectors handle?
A: Yes, these will be good up to about 450 WHP.
How much hp can 65lb injectors handle?
According to this the 65 lb injectors are good for 800 crank hp and the stock 56 lb should be good to 700 crank hp.
How much hp will 60lb injectors support?
How much HP can 65lb injectors handle?
What CC are 60lb injectors?
Fuel Injectors | Siemens Deka | 60 lb/hr | 630 cc/min | High Impedance | EV1 | 4 Cyl.