How do I access the harddrive on my HP probook 4540s?

Access and grasp the Mylar tab on the hard disk drive carrier and slide the hard disk drive to disconnect it from its connector on the system board. Pull up on the Mylar tab on the hard disk drive to lift and remove the hard disk drive out of the base enclosure.

How do I eject my hard drive from my HP?

On your desktop, right-click the icon of your hard drive and select Eject (disk name). Select your hard drive on your desktop, go to File in the Finder menu, then click Eject. Alternatively, you can use the shortcut key command CMD+E.

How do I eject a hard drive from my PC?

Locate your external storage device’s icon on the desktop. Drag the icon to the Trash bin, which will change to an Eject icon. Alternatively, hold the “Ctrl” key and left-click your mouse on the external drive’s icon. Click Eject on the pop-up menu.

How do I force eject a hard drive in Windows 10?

Go to the Start Menu, type in Disk Management and hit Enter. Locate the external hard drive that you want to eject. Right-click on your external hard drive and select ‘Eject’.

Can I replace the hard disk drive for HP ProBook 4540s notebook PC?

This document is provided to assist in removing and replacing the hard disk drive for HP ProBook 4540s Notebook PC. The end user requires no hardware-specific training to replace the defective part. The end user should have familiarity with system hardware and software requiring repair. Part numbers are subject to change.

Is the HP ProBook 4440s a good laptop for SMBs?

Loading… HP ProBook 4440s Notebook PC is optimized for Genuine Windows 7, these notebooks are ideal for SMBs with Intel UMA Graphics and AMD Discrete Graphics ATI Thames PRO M2. They offer multimedia tools, easy-to-use security and a sleek, vertical brushed aluminum casing.

How do I remove the hard disk drive from the notebook?

Loosen the four captive P1 Phillips-head screws that secure the hard disk drive assembly to the base enclosure. Disconnect the hard disk drive assembly from the system board by grasping the black Mylar tab… …and sliding the hard disk drive assembly toward the front of the notebook.

How to remove cooling fan in HP ProBook 4540s?

In HP ProBook 4540s the cooling fan can be easily accessed. In order to remove the fan you’ll have to remove one screw and disconnect the cable. NOTE: the fan must be removed in order to remove the top cover assembly as it shown in the step 25. STEP 16. Remove the cooling fan. Now you can clean it up from dust. Replacement fans available here.